INVESTIGATING OF ECO- AND ENERGY-EFFICIENT LUBRICATION STRATEGIES FOR THE DRILLING OF LIGHT METAL ALLOYS

Authors

  • N.F. Treurnicht Department of Industrial Engineering, Stellenbosch University
  • H.J. Joubert Department of Industrial Engineering, Stellenbosch University
  • G. Akdogan Department of Industrial Engineering, Stellenbosch University
  • G.A. Oosthuizen Department of Industrial Engineering, Stellenbosch University

DOI:

https://doi.org/10.7166/21-2-47

Keywords:

eco-efficient drilling processes, automotive industry, innovative lubrication methods, minimal quantity lubrication (MQL), aluminium-silicon alloys, infrared temperature measurements

Abstract

ENGLISH ABSTRACT: Energy use will be one of the main drivers for the achievement of more eco-efficient drilling processes in the automotive industry. Industry awareness of the environmental impact of used cutting emulsions, and the negative effect on worker health, has increased sharply. This has led to innovative lubrication methods such as through-spindle minimal quantity lubrication (MQL) for drilling aluminium-silicon alloys. In this work the performance of MQL at different cutting speeds and feed rates has been investigated using infrared temperature measurements. The results indicate that MQL is a feasible eco-efficient alternative to conventional flood cooling when drilling aluminium-silicon alloys.

AFRIKAANSE OPSOMMING: Energiebenutting maak een van die hoofdryfvere uit om eko-doeltreffendheid te behaal in boorprosesse in die motornywerheid. Nywerheidsbewustheid van die omgewingsimpak van gebruikte sny-vloeistowwe, en die negatiewe effek daarvan op werkergesondheid, het skerp toegeneem. Hierdie bewustheid het aanleiding gegee tot die ontwikkeling van smeringsmetodes soos deur-spil minimale hoeveelheid smering (Engels: Minimal Quantity Lubrication, MQL) vir die boor van aluminium-silikon legerings. In hierdie werk word die prestasie van MQL ondersoek teen verskillende snyspoed- en voertempo-kondisies deur middel van infra-rooi temperatuurmeting. Die resultate dui daarop dat MQL

Downloads

Download data is not yet available.

Downloads

Published

2011-11-05

How to Cite

Treurnicht, N., Joubert, H., Akdogan, G., & Oosthuizen, G. (2011). INVESTIGATING OF ECO- AND ENERGY-EFFICIENT LUBRICATION STRATEGIES FOR THE DRILLING OF LIGHT METAL ALLOYS. The South African Journal of Industrial Engineering, 21(2). https://doi.org/10.7166/21-2-47

Issue

Section

General Articles