HEAT TREATMENT OF TI-6AL-4V PRODUCED BY LASERCUSING

Authors

  • Thorsten Becker Stellenbosch University
  • Melody van Rooyen Stellenbosch University
  • Dimitri Dimitrov Stellenbosch University

DOI:

https://doi.org/10.7166/26-2-1161

Keywords:

Selective Laser Melting, Ti6Al4V, microstructure.

Abstract

LaserCUSING® is a selective laser melting (SLM) process that is capable of manufacturing parts by melting powder with heat input from a laser beam. LaserCUSING demonstrates potential for producing the intricate geometries specifically required for biomedical implants and aerospace applications. One main limitation to this form of rapid prototyping is the lack of published studies on the material performance of the resulting material. Studies of the material’s performance are often complicated by dependence on several factors, including starting powder properties, laser parameters, and post-processing heat treatments. This study aims to investigate the mechanical properties of LaserCUSING-produced Ti-6Al-4V and its performance relative to the conventional wrought counterpart. A combination of conventional and LaserCUSING-tailored heat treatments is performed. The resulting microstructures are studied and linked to the properties obtained from hardness tests. The findings highlight that LaserCused Ti-6Al-4V is competitive with traditional materials, provided that optimal parameters are chosen and parts are subject to tailored post-processing. In the as-built condition, LaserCused Ti-6Al-4V displays superior strength and hardness as a result of a martensitic microstructure, and a poorer performance in ductility. However, the material performance can be improved using tailored heat treatments. Careful consideration must be given to suitable post-processing before application in critical components in the aerospace or biomedical industry can occur

Downloads

Download data is not yet available.

Author Biographies

Thorsten Becker, Stellenbosch University

Senior Lecturer

Department of Mechanical and Mechatronic Engineering

Melody van Rooyen, Stellenbosch University

Msc student 

Department of Mechanical and Mechatronic Engineering

Dimitri Dimitrov, Stellenbosch University

Department of Industrial Engineering

Downloads

Published

2015-08-03

How to Cite

Becker, T., van Rooyen, M., & Dimitrov, D. (2015). HEAT TREATMENT OF TI-6AL-4V PRODUCED BY LASERCUSING. The South African Journal of Industrial Engineering, 26(2), 93–103. https://doi.org/10.7166/26-2-1161

Issue

Section

General Articles